Foshan Ennaide Sink Machinery Co.,Ltd

Manufacturer(15)

Foshan Ennaide Sink Machinery Co.,Ltd

Showing 1 - 10 of 15, total 2 pages [First] [Previous] [Next] [Last]

automatic flat polishing machine (double wheel)
Specification: 4350*1650*1750mm
Detail: Apply to stainless steel sink flat and plate flat polished, mirror effect or middle mirror effect can be done. Equipment running smoothly and fully automated,. easy to operation, press the button, the polishing process will be...

automatic polishing machine on the inside
Specification: 2250*900*1750mm
Detail: This machine is developed by ENNAIDE Hardware Machinery Co***ny, dedicated to sink polishing and sanding on the inside bowl. Apply to polish the side of stainless steel sink to mirror effect. Equipment running smoothly and ful...

automatic polishing machine on the bottom
Specification: 2300*900*1850mm
Detail: The machine uses an advanced programmable control technology, hydraulic propulsion, which is characterized by low production costs, high efficiency.

automatic sanding machine on the inside
Specification: 2300*900*1850mm
Detail: Do the hairline finish on the side, use the programmable controler, the fuel tank run, smooth operation.

automatic sanding machine on the bottom (hairline pattern)
Specification: 2300*1750*1800mm
Detail: This machine is on the sink bottom surface with a nylon belt surface sanding brushed. It is characterized by Grinding lines evenly¡¢Clear¡¢R angle and the bottom can be done at once. And the angle on the R can control. Easy to...

automatic sanding machine on the inside (use buff)
Specification: 2300*900*1850mm
Detail: This machine dedicated in the side of the stainless steel sink - do the hairline effect. Equipment using the programmable controller, Micro vibration motor, up and down work, random pattern on the handle at the bottom of the p...

automatic sanding machine on the bottom (sun pattern)
Specification: 2300*900*1850mm
Detail: This machine is my factory independent research and development equipment. This machine is mainly for the product requirements of the press water hole as the center and special designed, smooth operation, high degree of automa...

polishing machine for welding trace on the surface
Specification: 2260*900*1780mm
Detail: This machine dedicated to stainless steel sinks, used to deal with the welding trace between two sinks after two single sinks become one. After connect two single sinks, there will have remain welding trace on the connection p...

welding machine on the plane of sinks
Specification: 900*1250*2200mm
Detail: This welding machine special developed for the han***de sink co***ny, used to welding the connection of two sinks on the plane. After welding, the welding trace is very straight and will not have the welding trace on the rever...

welding machine on the r corner (r5-r25)
Specification: 900*850*1700mm
Detail: This is welding machine, used to connect the R corner of stainless steel sinks. This machine just suit for han***de sinks R5-R25, and can welding the R corner bottom at once. One side welding , the two other sides of the steel...


Showing 1 - 10 of 15, total 2 pages [First] [Previous] [Next] [Last]
1 2